Search Standards | Back to all Standards
- Liquid Sodium Silicate
- Aluminum Sulfate—Liquid, Ground, or Lump
- Sodium Aluminate
- Ferric Sulfate
- Liquid Ferric Chloride
- Liquid Polyaluminum Chloride
- Design of Prestressed Concrete Cylinder Pipe
- Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type
- Reinforced Concrete Pressure Pipe, Steel-Cylinder Type
- Prestressed Concrete Pressure Pipe, Steel-Cylinder Type
- Reinforced Concrete Pressure Pipe, Noncylinder Type
- Liquid Chlorine
- Ammonium Sulfate
- Sodium Chlorite
- Hypochlorites
- Disinfecting Water Mains
- Disinfection of Water-Storage Facilities
- Disinfection of Water Treatment Plants
- Disinfection of Wells
- ANSI Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
- ANSI Standard for Polyethylene Encasement for Ductile-Iron Pipe Systems
- ANSI Standard for Ductile-Iron and Gray-Iron Fittings, 3 In. Through 48 In. (76 mm Through 1,219 mm), for Water
- ANSI Standard for Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
- ANSI Standard for Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded Flanges
- ANSI Standard for Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings for Water Supply Service
- ANSI Standard for Thickness Design of Ductile-Iron Pipe
- ANSI Standard for Ductile-Iron Pipe, Centrifugally Cast, for Water
- Filtering Material
- Precoat Filter Media
- Direct-Reading, Remote-Registration Systems for Cold-Water Meters
- Cold-Water Meters—Displacement Type, Bronze Main Case
- Cold-Water Meters—Compound Type
- Cold-Water Meters—Fire Service Type
- Propeller-Type Meters for Waterworks Applications
- Encoder-Type Remote-Registration Systems for Cold-Water Meters
- Cold-Water Meters—Multijet Type (Includes addendum C708a-98)
- Cold-Water Meters—Displacement Type, Plastic Main Case
- Cement-Mortar Lining of Water Pipelines in Place—4 In. (100 mm) and Larger
- Underground Installation of Polyvinyl Chloride (PVC) Pressure Pipe and Fittings for Water
- Grooved and Shouldered Joints
- Installation of Ductile-Iron Water Mains and Their Appurtenances
- Installation of Steel Water Pipe--4 In. (100 mm) and Larger
- Contact-Molded, Fiberglass-Reinforced Plastic Wash Water Troughs and Launders (Includes addendum F101a-97)
- Matched-Die-Molded, Fiberglass-Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets (Includes addendum F102a-97)
- Polyvinyl Chloride (PVC) Pressure Pipe, and Fabricated Fittings, 4 In. Through 12 In. (100 mm Through 300 mm), for Water Distribution
- Polyvinyl Chloride (PVC) Pressure Fittings for Water—4 In. Through 8 In. (100 mm Through 200 mm)
- Fiberglass Pressure Pipe
- Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 In. Through 12 In. (100 mm Through 300 mm), for Water Distribution
- Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 14 In. Through 48 In. (350 mm Through 1,200 mm), for Water Transmission and Distribution
- Polyethylene (PE) Pressure Pipe and Tubing, ½ In. (13 mm) Through 3 In. (76 mm), for Water Service
- Polyethylene (PE) Pressure Pipe and Fittings, 4 In. (100 mm) Through 63 In. (1,575 mm), for Water Distribution
- Sodium Fluoride
- Sodium Fluorosilicate
- Fluorosilicic Acid
- Sulfur Dioxide
- Sodium Hydroxide (Caustic Soda)
- Calcium Chloride
- Disodium Phosphate, Anhydrous (Includes addendum B505a-97)
- Potassium Hydroxide (Includes addendum B511a-97)
- Sodium Polyphosphate, Glassy (Sodium Hexametaphosphate) (Includes addendum B502a-97)
- Sodium Tripolyphosphate (Includes addendum B503a-97)
- Monosodium Phosphate, Anhydrous (Includes addendum B504a-97)
- Underground Service Line Valves and Fittings (Also Included: Collected Standards for Service Line Materials)
- Sodium Chloride
- Soda Ash
- Quicklime and Hydrated Lime (Includes addendum B202a-97)
- Cement-Mortar Protective Lining and Coating for Steel Water Pipe—4 In. (100 mm) and Larger—Shop Application
- Steel Water Pipe—6 In. (150 mm) and Larger
- Coal-Tar Protective Coatings and Linings for Steel Water Pipelines—Enamel and Tape—Hot-Applied (Includes addendum C203a-99)
- Field Welding of Steel Water Pipe
- Steel Pipe Flanges for Waterworks Service—Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)
- Dimensions for Fabricated Steel Water Pipe Fittings
- Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
- Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines
- Tape Coating Systems for the Exterior of Steel Water Pipelines
- Cold-Applied Tape Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipe
- Fabricated Steel Mechanical Slip-Type Expansion Joints
- Fusion-Bonded Polyethylene Coating for the Exterior of Steel Water Pipelines
- Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings
- Factory-Coated Bolted Steel Tanks for Water Storage
- Automatically Controlled, Impressed-Current Cathodic Protection for the Interior of Steel Water Tanks
- Wire- and Strand-Wound, Circular, Prestressed Concrete Water Tanks (Includes addendum D110a-96)
- Circular Prestressed Concrete Water Tanks With Circumferential Tendons
- Thermosetting Fiberglass-Reinforced Plastic Tanks
- Flexible-Membrane-Lining and Floating-Cover Materials for Potable Water Storage
- Powdered Activated Carbon
- Sodium Metabisulfite
- Copper Sulfate (Includes addendum B602a-97)
- Potassium Permanganate
- Granular Activated Carbon
- Reactivation of Granulated Activated
- Metal-Seated Gate Valves for Water Supply Service (Includes addendum C500a-95)
- Dry-Barrel Fire Hydrants
- Wet-Barrel Fire Hydrants
- Rubber-Seated Butterfly Valves
- Ball Valves, 6 In. Through 48 In. (150 mm Through 1,200 mm)
- Swing-Check Valves for Waterworks Service, 2 In. (50 mm) Through 24 In.( 600 mm) NPS
- Resilient-Seated Gate Valves for Water Supply Service (Includes addendum C509a-95)
- Double Check Valve Backflow Prevention Assembly
- Reduced-Pressure Principle Backflow Prevention Assembly
- Pilot-Operated Control Valves
(Back to all Standards)
