Search Standards | Back to all Standards
- Standard Terminology of Adhesives
- Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
- Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
- Standard Specification for Chemical Admixtures for Concrete
- Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
- Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
- Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
- Standard Test Method for Slump of Hydraulic Cement Concrete
- Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
- Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
- Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty
- Standard Practice for Making and Curing Concrete Test Specimens in the Field
- Standard Practice for Surface Cleaning Concrete Unit Masonry for Coating
- Standard Practice for Reducing Samples of Aggregate to Testing Size
- Standard Specification for Concrete Aggregates
- Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
- Standard Specification for Air-Entraining Admixtures for Concrete
- Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
- Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
- Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
- Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
- Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
- Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
- Standard Specification for Calcium Chloride
- Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
- Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
- Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
- Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
- Standard Specification for Chemical-Resistant Masonry Units
- Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
- Standard Terminology for Paint Roller Application Tools
- Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
- Standard Specification for Nitration Grade Xylene
- Standard Guide for Determining Volatile and Nonvolatile Content of Pigments
- Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants
- Standard Specification for Metallic Copper Powder for Use in Antifouling Paints
- Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
- Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives
- Standard Terminology and Acronyms Relating to Corrosion
- Standard Test Method for Determining the Effects of Chemical Admixtures on the Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
- Standard Guide for Corrosion-Related Failure Analysis
- Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
- Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
- Standard Practice for Operating Salt Spray (Fog) Apparatus
- Standard Practice for Modified Salt Spray (Fog) Testing
- Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
- Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
- Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products
- Standard Guide for Conducting Corrosion Tests in Field Applications
- Standard Terminology Relating to Corrosion and Corrosion Testing
- Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
- Standard Guide for Examination and Evaluation of Pitting Corrosion
- Standard Specification for Friction Tape
- Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
- Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
- Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
- Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
- Standard Practice for Measurement of Wet Film Thickness by Notch Gages
- Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
- Standard Test Methods for Water Vapor Transmission of Organic Coating Films
- Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions
- Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
- Standard Test Method for Color Development in Tinted Latex Paints
- Standard Test Method for Measuring Paint Spatter Resistance During Roller Application
- Standard Practice for Preparation of Paint Brushes for Evaluation
- Standard Test Methods for Sampling and Testing Dipentene
- Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
- Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines
- Standard Test Method for Evaluating Pipeline Coating Patch Materials
- Standard Test Methods for Evaluating Coatings For High Temperature Service
- Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
- D7127-05 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
- Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
- Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
- Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
- Standard Specification for Methyl Isobutyl Ketone
- Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
- Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist
- Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
- Standard Test Method for Chipping Resistance of Coatings
- Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces
- Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces
- Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight
- Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water
- Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
- Standard Practice for Conducting a Patch Test to Assess Coating Compatibility
- Standard Specification for Liquid Paint Driers
- Standard Terminology for Paint, Related Coatings, Materials, and Applications
- Standard Terminology Relating to Metallic Coated Steel Products
- Standard Practice for Measuring Curl in Paint Brush Filling Material
- Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
- Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
- Standard Specification for Zinc Yellow (Zinc Chromate) Pigments
- Standard Test Method for Determination of the Individual Volatile Organic Compounds (VOCs) in Air-Dry Coatings by Gas Chromatography
- Standard Terminology for Paint Brush Application Tools
- Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
- Standard Practice for Liquid and Gelled Acid Etching of Concrete
- Standard Practice for Surface Cleaning Concrete for Coating
- Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfac
- Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
- Standard Practice for Abrading Concrete
- Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
- Standard Test Methods for Scrub Resistance of Wall Paints
- Standard for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
- Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip
- Standard Guide for Testing Industrial Protective Coatings
- Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container
- Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
- Standard Test Method for Open Time of Latex Paints
- Standard Test Method for Volatile Content of Coatings
- Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
- Standard Test Method for Film Hardness by Pencil Test
- Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
- Standard Test Method for Hiding Power of Paints by Reflectometry
- Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
- Standard Test Method for Fire Retardancy of Paints (Cabinet Method)
- Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints
- Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates
- Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
- Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
- Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
- Standard Classification for Dry Pigmentary Titanium Dioxide Products
- Standard Specification for Zinc Dust Pigment
- Standard Specification for Chrome Oxide Green Pigment
- Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
- Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
- Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
- Standard Test Method for Leveling of Paints by Draw-Down Method
- Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
- Standard Test Method for Evaluating Degree of Settling of Paint
- Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films
- Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
- Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
- Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
- Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
- Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
- Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
- Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
- Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
- Standard Test Method for Tensile Properties of Organic Coatings
- Standard Test Method for Pigment Content of Solvent-Reducible Paints
- Standard Test Method for Detection of Lead in Paint and Dried Paint Films
- Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
- Standard Test Method for Comparison of the Brush Drag of Latex Paints
- Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
- Standard Guide for Testing Water-Borne Architectural Coatings
- Standard Test Method for Specific Bendability of Pipeline Coatings
- Standard Test Method for Chemical Resistance of Pipeline Coatings
- Standard Test Method for Washability Properties of Interior Architectural Coatings
- Standard Test Method for Roundness of Glass Spheres
- Standard Test Method for Evaluating Degree of Bleeding of Traffic Paint
- Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
- Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
- Standard Practice for Evaluating Degree of Traffic Paint Line Wear
- Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
- Standard Test Method for Viscosity by Ford Viscosity Cup
- Standard Test Methods for Measuring Adhesion by Tape Test
- Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
- Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
- Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints
- Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants
- Standard Practice for Selection of Coating Specimens for Appearance Measurements
- Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
- Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
- Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
- Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
- Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
- Standard Guide to Testing Solvent-Borne Architectural Coatings
- Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
- Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
- Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
- Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings
- Standard Practice for Field Identification of Coatings
- Standard Guide for Testing Varnishes
- Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement
- Standard Test Methods for Analysis of White Zinc Pigments
- Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
- Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
- Standard Specification for Zinc Oxide Pigments
- Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet
- Standard Test Method for Evaluating Degree of Blistering of Paints
- Standard Test Method for Evaluation of Cleanability of Paint Brushes
- Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America
- Standard Guide for Listing Relevant Standards and Publications for Commercial Shipbuilding
- Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
- Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
- Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
- Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
- Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
- Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
- Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
- Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants
- Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
- Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
- Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood
- Standard Guide for Management of Non-Conforming Coatings in Coating Service Level I Areas of Nuclear Power Plants
- Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities
- Standard Guide for Painting Inspectors (Metal Substrates)
- Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
- Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
- Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
- Standard Specification for Electrodeposited Coatings of Cadmium
- Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
- Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
- Standard Specification for Aluminum Powder and Paste Pigments for Paints
- Standard Specification for Metallic Copper Powder for use in Antifouling Paints
- Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
- Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Over Concrete Using an Ultrasonic Gage
- Standard Pictorial Surface Preparation Standards for Painting Steel Surfaces
- Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
- Standard Test Methods for Coarse Particles in Pigments
- Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
- Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings
- Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)
- Standard Test Methods for Common Properties of Certain Pigments
- Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
- Standard Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe
- Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
- Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
- Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
- Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
- Standard Test Method for Evaluating Degree of Checking of Exterior Paints
- Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
- Standard Specification for 2-Ethoxyethanol
- Standard Specification for Lampblack Pigment
- Standard Specification for Spirits of Turpentine
- Standard Test Methods for Electrical Conductivity and Resistivity of Water
- Standard Specification for Raw Tung Oil
- Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
- Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
- Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Examination Methods
- Standard Test Methods for Analysis of Barium Sulfate Pigment
- Standard Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
- Standard Specification for Red Lead Pigment
- Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
- Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
- Standard Test Method for Specular Gloss
- Standard Specification for Carbon Black Pigment for Paint
- Standard Specification for Barium Sulfate Pigments
- Standard Specification for Diatomaceous Silica Pigment
- Standard Specification for Magnesium Silicate Pigment (Talc)
- Standard Specification for Wet Ground Mica Pigments
- Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
- Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
- Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
- Standard Test Method for Flash Point by Tag Closed Cup Tester
- Standard Test Methods for Analysis of Lubricating Grease
- Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
- Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment
- Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
- Standard Practice for Inspection of Marine Surface Preparation and Coating Application
- Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces
- Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
- Standard Test Method for Impact Flexibility of Organic Coatings
- Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
- Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
- Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
- Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water
- Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
- Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
- Standard Test Methods for Holiday Detection in Pipeline Coatings
- Standard Test Method for Abrasion Resistance of Pipeline Coatings
- Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed
- Standard Test Method for Mar Resistance of Organic Coatings
- Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
- Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
- Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
- Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
- Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
- Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
- Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
- Standard Test Method for Evaluating Adhesion by Knife
- Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants
- Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
- Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
- Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
- Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
- Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device
- Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
- Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
- Standard Guide for Testing Exterior Wood Stains
- Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
- Standard Practice for Determination of Graffiti Resistance
- Standard Test Method for Testing Fracture of Level Paintbrush Filaments
- Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
- Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
- Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans
- Standard Practice for Physical Characterization of Paint Brushes
- Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints
- Standard Test Method for Bond Strength of Chemical-Resistant Mortars
- Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”
- Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
- Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
- Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling
- Standard Test Method for Indendation Hardess of Organic Coatings
- Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
- Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water
- Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
- Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
- Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
- Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating Work Inspection in Nuclear Facilities
- Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments
- Standard Test Method for Viscosity by Dip-Type Viscosity Cups
- Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
- Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions
- Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base
- Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base
- Standard Test Method for Surface Burning Characteristics of Building Materials
- Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures
- Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
- Standard Practice for Sampling Aggregates
- Standard Test Method for Float Test for Bituminous Materials
- Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials
- Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications
- Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- Standard Test Method for Penetration of Bituminous Materials
- Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
- Standard Test Method for Distillation of Road Tars
- Standard Test Methods for Rubber Property-Adhesion to Rigid Substrates
- Standard Test Method for Rubber Property—Durometer Hardness
- Standard Specification for Deformed and Plain Carbon-SteelBars for Concrete Reinforcement
- Standard Guide for Laboratory Simulation of Corrosion Under Insulation
- Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
- Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
- Standard Specification for Carbon Structural Steel
- Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
- Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
- Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
- Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip
- Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application
- Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
- Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
- Standard Specification for Epoxy-Coated Steel Reinforcing Bars
- Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
- Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
- Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
- Standard Practice for Inspecting the Coating System of a Ship
(Back to all Standards)
